The FUTREX-6100 provides fast accurate measurements of Essential Body Fat, Reserve Body Fat, and Excess Body Fat.
The
FUTREX-6100 is Futrex's most advanced body composition analyzer. It offers the
same accuracy and repeatability as the FUTREX-5500,
while requiring less information
on the test subject. It is FDA 510(k) cleared and carries the CE Medical mark for international use.
The FUTREX-6100 Provides the Following Results:
Percent Body Fat- Total Body Fat (pounds or kg)
- Weight of "Essential Body Fat" - This amount of body fat is needed to protect
the body from infectious diseases and to protect the internal organs from bruising
damage.
- Weight of "Reserve Body Fat" - The amount of additional body fat that does not
cause any medical risks, and provides a reservoir
of "fuel" for use by the body.
- Weight
of "Excess Body Fat" - The amount of body fat that is over and above the combination
of Essential Body Fat plus Reserve Body Fat. Excess Body Fat causes the risk of
serious health problems such as strokes, heart attacks, diabetes and certain forms
of cancer.
- Weight of "Essential Body Fat" - This amount of body fat is needed to protect
the body from infectious diseases and to protect the internal organs from bruising
damage.
- Total Lean Mass (pound or kg)
- Basal Metabolic Rate
- Total Body Water
- Body Mass Index
Product Features:
- FDA 510(k) Cleared
- European Medical CE (0459) Marked
- Portable (Battery Operated)
- Includes Power Adapter for use with AC Electricity
- Easy to Use
- No Special Training Needed
- No Pre-Test Protocols
- Includes Powerful Software for Post Measurement Reports and Client Tracking
- Includes an Attractive, Durable Carrying Case with all Needed Accessories:
- 6 Rolls of Thermal Paper (for test results)
- Operations Manual
- Light Shield
- Optical Standard
- Biceps Locator
- Snap Shot of Your Heath & Fitness Form (for post test interpretation)
- Computer Communications Cable
- Bodyometry Software
- Coupon Software
- AC Adapter
- 6 AA Batteries
The FUTREX-6100 is available in two separate calibration sets:
The
FUTREX-6100/XL
The XL version of the FUTREX-6100 is calibrated for adults
age 18 and above.
The
FUTREX-6100A/ZL
The A/ZL version of the FUTREX-6100 is calibrated for adults
age 18 and above, and includes a separate calibration for
children from the ages
of 5-17.
Each test result discusses the benefits or risks of having a good, a high, or a low body fat percentage.
Too Much Body Fat Too Little Body Fat Good Body Fat
While percent body fat is as important as ever, by categorizing the three types of fat, the FUTREX-6100 allows trainers and clients to focus on the excess fat, while maintaining the essential fat necessary for good health.
Bodyometry
Powerful Analysis Software for the Futrex-6100Bodyometry turns your FUTREX into a complete wellness & fitness management system. The FUTREX can interface directly with Bodyometry to generate complete fitness and wellness reports, provide nutritional and exercise information, and track progress over time.
Bodyometry is included FREE OF CHARGE with all FUTREX®-5500 models and FUTREX®-6100 models, and may be purchased to be used on its own.

Bodyometry
Demo Available |
Click Here To Download demo.zip (2.1 mb)
|
Valuable Reports
Bodyometry allows you to produce powerful fitness assesment reports that add value and revenue potential to your business. Reports include:
Body Composition/Fitness Analysis ReportProvides an in depth look at health & fitness
Click Here to view a sample report
- The Importance of Body Fat
- The Importance of Weight
- The Body’s Use of Food Energy
- Nutrition & Exercise Recommendations
- Generate “Update” Reports to Evaluate ProgressPhysical Analysis Ratings Report
Provides a complete fitness assessment package to evaluate:
- Cardiovascular & Respiratory Capabilities
- Aerobic Capacity
- Body Composition
- Flexibility
- Muscular Strength
- Muscular Endurance
Click Here to view a sample report
Helps Promote Your Business
• The Futrex-6100/XL includes coupon software that lets you print promtional coupons with the body composition results.

Measuring Body Fat with Near Infrared Light
What is Body Composition?
Body composition is simply the ratio of lean body mass to fat body mass. Too much fat can lead to health problems like heart disease, diabetes, high cholesterol and other serious conditions. Too little body fat can be just as detrimental as too much. If people can keep their body fat at a reasonable level, they will be healthier, happier, and, of course, look their best.
This makes monitoring percent body fat a key component of any weight loss or fitness program. Health and fitness professionals have long recognized the importance of measuring the body fat of their clients.
The most successful of them know how body fat analysis can help grow their business, increase their profits, and show clients the positive results of their hard work. Futrex’s patented Near-Infrared Body Composition Analyzers have helped thousands of physicians, health club owners, chiropractors, personal trainers, physical therapists, and others do exactly that
Why Measure Body Fat at All?
Percent body fat is known to be a key factor in determining fitness. It is also a known indicator of disease risk. Weight alone is not a reliable indicator of good health.
Obesity is a known risk for many serious medical conditions including heart disease, diabetes and even certain forms of cancer.
Weight (pounds on the scale) does not distinguish between pounds that come from body fat and those that come from lean body mass or muscle. Carrying too much fat is what makes a person obese.
Body composition analysis is a proven benefit for fitness & wellness professionals. Quick, easy, and NON-INVASIVE body fat testing is invaluable.
Whether you think of them as body fat testers or body composition analyzers, The FUTREX professional system is the ideal choice for body composition analysis:
Body fat testing has never been easier to provide. The Futrex® Near-Infrared Body Fat Analyzer is the revolutionary tool health, fitness, and athletic professionals use today.
With several body fat testing methods to choose from, none come close to the accuracy, reproducibility, AND convenience of Futrex. Calculate body fat and hydration levels in just 60 seconds with Futrex.
Body composition testing using hydrostatic methods is expensive and inconvenient. Skin fold body fat testing requires the same technician to complete the body fat test to ensure accuracy. In addition, body fat testing with skin fold calipers can become increasingly unreliable for obese clients or patients. DEXA testing can only be done in hospitals. Bioelectrical Impedance Analysis (BIA) Body Fat Scales require strict pre-test protocols and cannot be used on children of a certain age range, pregnant women, or on individuals with cardiac implants (pacemakers or defibrillators).
The FUTREX professional system is the ideal choice for body composition analysis:
• Provides a direct measurement of percent body fat and hydration levels• No pre-test protocols to follow
• Non-invasive and easy to use
• Use it on anyone, anywhere, anytime• Gold Standard Accuracy
• Superior Near-Infrared Technology
• Lightweight & Portable
Single Site Measurement -- How Does It Work?
Futrex offers the only method of measuring body fat that uses completely safe, Near-Infrared light to directly measure percent body fat. U.S. Government research has determined that the midpoint of the biceps has a direct correlation with the body’s overall fat level.

During operation, the Futrex sends a safe, Near-Infrared light beam into the biceps at specific wavelengths that fat will absorb and lean mass will reflect. The light absorption is measured to determine body fat -- it’s that simple!
Test results, which are traceable to underwater weighing, are instantly displayed, for your customers to see.
Compare The Technologies
FUTREX |
Under Water Weighing |
Skin Fold Calipers |
Bio-Electrical
Impedance |
|
| Need For Fasting | No |
Yes - 2 Hours |
No |
Yes - 4 hours Avoid Alcohol for 48 Hours
|
| Need For Disrobing | No |
Yes |
Yes |
Yes - socks or stockings
must be removed |
| Measure After Exercise | Yes |
No |
No |
No - avoid intense
exercise 12 hours prior to test |
| Need For Voiding* | No |
Yes - Within 30
minutes of test |
No |
Yes - Within 30
minutes of test |
| Accuracy | Excellent |
Excellent |
Moderate |
Excellent, if above
criteria is followed |
| Repeatability | Excellent |
Moderate |
Depends On Operator |
Excellent, if above
criteria is followed |
| Possible Risks | None |
None |
None |
Yes, for those with
pacemakers or internal defibrillators; unknown during early pregnancy |
| *Voiding means emptying the bladder | ||||
NIH Panel Evaluates Bio-Electrical Impedance Body Fat Analyzers (HTML)
Body Composition for Body Builders
Gold Standard for Body Fat Measurement
The official method of measuring percent body fat is hydrostatic weighing. In this approach, the person sits in a seat slung from a sensitive scale. The person is then lowered into a water tank until totally submerged. The buoyancy, which is related to the difference in weight between measurement outside the water and when fully immersed in water, is used to calculate the percent body fat. This calculation can be done because there is a significant difference in the density of fat compared to the density of muscle. The method measures the combination of subcutaneous and intramuscular fat.
Unfortunately, hydrostatic weighing is inconvenient to use. Therefore, an alternate method that has similar accuracy to hydrostatic weighing must be used.
Limitations of Using Skinfold Calipers
Skinfold calipers were developed as a low-cost alternative to hydrostatic weighing. The measurement is performed by pinching the skin and measuring its thickness at either three or five sites on the body. These “pinch thicknesses” are entered into mathematical equations that calculate the percent body fat.
In developing the equations, researchers used a large group of typical college students as the test subjects. In this population it was properly assumed that the subcutaneous fat (the amount measured by pinching the skin) is approximately equal to the intramuscular fat. This assumption is true for most of the population. However, it is not valid for bodybuilders where intramuscular is typically five times or more larger than the subcutaneous fat. Therefore, using calipers to estimate the percent body fat of bodybuilders yields results that are much too low.
The FUTREX Approach
About 20 years ago, the U.S. Government’s research laboratories in Beltsville, Maryland, demonstrated that percent body fat can be accurately measured using harmless low energy light. The research proved that the amount of fat in a body part could be accurately determined by analyzing the change in the light as it went through the body part.
The government researchers made one other fundamental discovery:
That there were specific sites on the human body where the local percent fat is directly proportional to the percent fat of the total body. They further proved it didn’t matter whether you were a super-athlete, a bodybuilder, or a couch potato, that a measurement using light on just one of those body sites provided the same percent body fat as the official hydrostatic test.
Futrex uses this accurate, yet harmless light to measure the combination of the subcutaneous and the intramuscular fat, thus providing accurate total percent body fat. Over 100,000 of similar light interactance instruments are currently being used by professional sports teams, law enforcement agencies, college sports teams, etc.
What Percent Body Fat Should Body Builders Have?
When champion body builders get tested with calipers, their percent body fat appears to be very low, e.g., 3%. However, when the same body builders are measured using the official hydrostatic procedure, their true percent body fat is actually between 12% and 18%. Why this difference? It occurs from three different items:
· What body builders are trying to accomplish
· The “Gold Standard” method of determining body fat
· Limitations of using skinfold calipers.
What are Body Builders Trying to Do?
Simply stated, body builders desire to highlight their body’s muscular content. To accomplish this, they perform an exercise regime that significantly reduces the subcutaneous fat and yet retains the intramuscular fat. The subcutaneous fat is located directly under the skin and hides the body’s muscular development. Thus, the body builders’ exercise program must reduce this subcutaneous level as much as possible. Intramuscular fat is the fat layers that are located within the muscles and make the muscles look larger.
Certainly, different types of athletes desire different relationships between subcutaneous and intramuscular fat. For example, a pro football wide receiver must have as low a percent fat as possible, typically 4% or less, to provide maximum speed and agility. However, body builders are not attempting to have speed and agility. Their desire is to provide the maximum visual impact of their muscular development. To do this, they must minimize the amount of subcutaneous fat and they must retain a significant amount of intramuscular fat.
Bodybuilders gain and retain intramuscular fat through diet and lack of aerobic exercise. This limited cardio work thereby avoids the use of stored intramuscular fat for fuel.
Call Today
301-791-9220
or
e-mail:
futrex@futrex.com
Click Here to Request Additional Information





